Very Urgent Help SENALLNUM sig

[TeleLion]

Can some one please provide me with interpretation of those two signals:

08.22.56.680 00008 SWSW SIGNAL SENALLNUM (H'0049)
FROM RMP (H'0319) EXE IN LIM 009
TO TLP22 (H'039C) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'00 H'61 H'34 H'07 H'07 H'FF H'FF H'FF H'00 H'00
010 H'07 H'43 H'78 H'24 H'FA H'FF H'FF H'FF H'FF H'FF
020 H'FF H'04 H'FF H'FF H'FF H'00 H'00 H'00 H'03 H'00
030 H'03 H'00 H'02 H'00 H'00 H'02 H'00 H'36




1.25.04.800 00008 SWSW SIGNAL SENALLNUM (H'0049)
FROM RMP (H'0319) EXE IN LIM 001
TO TLP22 (H'039C) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'00 H'61 H'36 H'07 H'07 H'FF H'FF H'FF H'00 H'00
010 H'07 H'4F H'05 H'77 H'FA H'FF H'FF H'FF H'FF H'FF
020 H'FF H'00 H'FF H'FF H'FF H'00 H'00 H'00 H'03 H'00
030 H'03 H'00 H'6A H'08 H'08 H'F4 H'D2 H'02

TELEC3

 

[whosrdaddy]

what software? always provide the version when asking questions like these...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

first signal -> sent number = 348742*
second signal -> sent number = (F)? 45077*

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[fcpli]

How did you trace this? STSII? Trace RMP or TLP22, these printouts are somehow wicked.....

 

[TeleLion]

FCPLI:TSW SP2 using TLP22.

Where can i see the last A number been sent to my public trunk (telident link), will this be TLP22 > SENALLNUM or RMP > SENCONINF?????

MDE >>>--IP Networking--<<<MX-One TSW SP2>>--BTU3(TLP22)--<<Telident system

Basically i have a problem sending A number when the call is coming in through IP networking towards the MX-One TSW and then going out through a BTU3 TLP22 to a Telident system (transit call). A number works fine for calls generated from the MX-One it self.

TELEC3

 

[fcpli]

try FETDIRNUMRES in RMP. SENALLNUM is the B-number.

fcpli

 

[IPuser]

You are Sending A-Number to an Analogue Tie Line via BTU-3 ? How ?
Is your digit sending via DTMF or MFC ?
Your VAR Parameters might tell us .
(RODAP : ROU=....

A- Number to Analogue trunks has often been special patched - so it doesn't always work good for all cases.

To see How it's being done , let's see a full signal trace with STSII:SIGNAM=CALFRMTRU,UNITR=DTR,LIMR=[where the IP Trunk is];.
plus.
STTSS:TRI=...,SIZE=[the highest number it will take];
plus
CADAP;
PCLOP:UNIT=RMP;
PCLOP:UNIT=DTR;
PCLOP:UNIT=TLP22;

 

[TeleLion]

Thanks i think this is fixed now, we had to run a patch.

TELEC3