Hello!
I have an other issue.
We have a MS-PrinterServer behind the inside-interface (=protected server-lan). The Clients are behind the ClientLAN (lower priority than the inside-lan). Generally the access from the ClientLAN to the InsideLAN works fine (Netbios, http, tcp_3389, etc.) BUT printing is quit slow.
When a Client tries to print out over the MS-PrintServer the hole Client is frozen for about 5 to 10 seconds. After this time periode the file is printed.
Between this two lan-segemnts the hole ip-traffic is allowed (in both directions). A debug on the pix only showed that the data are transferted several times between the client and the MS-PrinterServer. On the switch i can not see any retransmissions, etc. on the two connected ports. The ports are set to 100full.
Has somebody an idea?
Best regards
Martin
----------------------------------
Martin Peinsipp, Austria
CCSA,
IT-Security-Administrator
I have an other issue.
We have a MS-PrinterServer behind the inside-interface (=protected server-lan). The Clients are behind the ClientLAN (lower priority than the inside-lan). Generally the access from the ClientLAN to the InsideLAN works fine (Netbios, http, tcp_3389, etc.) BUT printing is quit slow.
When a Client tries to print out over the MS-PrintServer the hole Client is frozen for about 5 to 10 seconds. After this time periode the file is printed.
Between this two lan-segemnts the hole ip-traffic is allowed (in both directions). A debug on the pix only showed that the data are transferted several times between the client and the MS-PrinterServer. On the switch i can not see any retransmissions, etc. on the two connected ports. The ports are set to 100full.
Has somebody an idea?
Best regards
Martin
----------------------------------
Martin Peinsipp, Austria
CCSA,
IT-Security-Administrator
