I have a Verizon DSL connection. It is an ActionTec GT784WNV DSL modem. I have a block of 5 static IPs for this connection. The first static is assigned to the DSL connection. I want the Cisco ASA 5505 to be assigned the second static address. How do I go about doing this? Should it just work as long as it is connected to the Verizon DSL modem, or do I have to configure something?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Verizon DSL to Cisco ASA
- Thread starter thec0dy
- Start date
cflcrosland
IS-IT--Management
- Apr 3, 2012
- 35
Depends on the ActionTec Modem/router box,
Wouldnt harm anything if you tried assigning the ASA an address in the correct range an see if it worked.
If it Was a cisco router you could use static NAT to map an internal IP to an external IP
Wouldnt harm anything if you tried assigning the ASA an address in the correct range an see if it worked.
If it Was a cisco router you could use static NAT to map an internal IP to an external IP
- Status