I have a customer that is having issues getting their LSP to register. I have determined that the software release is below the core (6.3) so it will need to be upgraded. Can anyone tell me how to verify what is currently assigned to Dom0, Cdom, and Utility? Currently, he only IP address/access I have at this time is to the CM.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Verify IP addresses for S8300 Embedded remote survivable
- Thread starter kj1971
- Start date
If you have shell level access to the CM then all of the IP addresses for cdom, dom0, US, etc. can be found in the file /opt/vsp/ovf-env.txt. If you are not able to drop down to the shell then you may need to find who has access to the cdom UI to get that information.
- Status
Similar threads
- Locked
- Question