Vector reference Question 2

[PMMrMan]

Hello All,

I hope this is a simple question.

I've got a customer that I'm cleaning up / auditing their vector programming.

I've noticed a number of Vectors that seem to be orphaned. They don't seem to be referenced by a VDN or a GOTO Vector command. I'd like to recommend to the customer that these vectors should be deleted but I want to be sure that I'm correct.

Is there any other way to reference a Vector???

Thanks in advance.

 

[4merAvaya]

Try running 'list usage vector xxx'. That will show you everywhere vector xxx is used.

Kevin

 

[Stinney]

If you want to show the customer they are not in use, do what Kevin suggests. I would do it in Emulator Mode, then print the results. The Emulator Mode will show the command and it will show the results "no data found". In GEDI it won't show the command and the no data found statement.

- Stinney

Quoting only proves you know how to cut and paste.

 

[PMMrMan]

Guys,

That was PERFECT!!! I was able to verify all the Vectors that are not referenced by VDNs or other vectors. Thanks all.