v5r2m0 *COR and rotation issues

[os400]

They made me do it........ upgrade to v5r2m0. Now, when printing to rmt outqs (all IP locations), *COR does not seem to work. Output that was previously rotated to landscape and cpi set to 13 or 15 cpi no longer works. Print is at 10cpi, landscape happens but print is cut at 80 cols and only 45 or so lines are printed. I have changed the Q* prtfs to *COR for the PAGRTT parm. I have re-run some of the pgms to reproduce output. Same results. Did I miss some manual conversion step or is there some other change I need to make?

tia

Mike Butler
Iseries + Sun + PC = Tired Guy
"Never put off 'til tomorrow what you should have done yesterday

 

[Kozusnik]

I haven't had the need to set up a remote outq for a while, but I thought you could use a workstation customization object with them. Am I right. I'll check next time I on a 400 (Thursday.)

Mark

 

[os400]

UPDATE: I think we got it fixed. I changed all *prtf's PAGRTT to *COR. Some were at *AUTO and some at *DEVD. I also recreated one of the OUTQs. So far things are looking good.

Mike Butler
Iseries + Sun + PC = Tired Guy
"Never put off 'til tomorrow what you should have done yesterday

 

[os400]

Update: Looks like I managed to break things.
Now *cor doesn't rotate. It asks for 11x17 paper. All are going to rmt outq's. Here's the setup:

Output queue . . . . . . . . . . OUTQ         > MYPRINT     
  Library  . . . . . . . . . . .              >   QUSRSYS   
Maximum spooled file size:       MAXPAGES                   
  Number of pages  . . . . . . .                *NONE      
  Starting time  . . . . . . . .                            
  Ending time  . . . . . . . . .                            
                          + for more values                 
Order of files on queue  . . . . SEQ            *FIFO       
Remote system  . . . . . . . . . RMTSYS         *INTNETADR  
Remote printer queue . . . . . . RMTPRTQ        'raw'
Writers to autostart . . . . . . AUTOSTRWTR     1        
Queue for writer messages  . . . MSGQ           QSYSOPR  
  Library  . . . . . . . . . . .                  *LIBL  
Connection type  . . . . . . . . CNNTYPE        *IP     
Destination type . . . . . . . . DESTTYPE       *OTHER   
Host print transform . . . . . . TRANSFORM      *YES           
Manufacturer type and model  . . MFRTYPMDL      *HP5000
Workstation customizing object   WSCST          *NONE 
Image configuration  . . . . . . IMGCFG         *NONE 
Internet address . . . . . . . .INTNETADR '157.198.xxx.xxx' 
Destination options  . . . . . . DESTOPT        *NONE   
Normally set to XAIX and XAUTOQ 
Print separator page . . . . . . SEPPAGE        *YES

With the PRTF set to *cor for pagrtt this should produce landscape on 8.5x11 paper. instead I'm getting a request for 11x17 paper. Any thoughts.

Mike Butler
Iseries + Sun + PC = Tired Guy
"Never put off 'til tomorrow what you should have done yesterday