Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

V3 Disappointments

Status
Not open for further replies.

IPOMonkey

Programmer
Jun 18, 2003
163
GB
The new handsets look the part(54xx/56xx)but do not have half as many features as a DT handset.


Does anyone have a recommended button layout?

I can't get a button to set the call forward busy number unless the number is always the same.
CFwd works great but a BNA the same would be good.

Call park is much better on a DT handset and Call Ride will always require a custom shortcode so you can specify the park slot.

:0(

Any Views?

 
Park & ride is great on the DT if carfully programmed

Park, alocates a park bay number, Dial park bay to retieve call just increase the Dialed digit count & add the following short code

SC 2XXX
Number .
Feature Ride call

(assuming extns int he range 200-299)


 
opps mis read, Correct park is much better implemented on DT's

I think the current state of afairs on DT suppoort is very fluid (it was only dropped towards the end of field trial mainly to save time on testing.)

The current feed back Avaya are recieving is likely to make them reconsider. Watch the bulletins closly over the next few weeks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top