Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

V215 ALOM problem

Status
Not open for further replies.
Nov 24, 2004
159
GB
Afet i setsc the network config for the net mgt port i ran the restsc command

now iall i get is the alom rebooting istself

please see below for the actions

I get the login prompt but as soon as i start typing it reboots

SC Alert: SC System booted.

ALOM - min post no output

ALOM POST 1.0


Dual Port Memory Test, PASSED.

TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.

TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.

TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.



Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff

Returned from Boot Monitor and Handshake



Loading the runtime image...

SC Alert: Input power unavailable for PSU @ PS0.


Full VxDiag Tests

BASIC TOD TEST
Read the TOD Clock: WED JAN 24 09:49:14 2007
Wait, 1 - 3 seconds
Read the TOD Clock: WED JAN 24 09:49:16 2007
BASIC TOD TEST, PASSED

ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED

Full VxDiag Tests - PASSED



Status summary - Status = 7FFF

VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED

I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED

ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED

TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED


Please login:
SC Alert: SC System booted.
 
forgot to add if i run
/usr/bin/cd /usr/platform/`uname -i`/sbin/scadm

i get the error

scadm: The SC hardware could not be initialized.
 
fixed it

I had the netsc_dhcp set to true, with a cable in it kept rebooting looking for a DHCP server
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top