I just got a new U.S. Robotics External RS-232 modem that supports v.92. I am using Netzero as my ISP and can't get any support because I am using the free service. I would like to know if anyone can tell me if Netzero supports the v.92 feature of modem on hold. If not which ISP is supporting this feature.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
v.92 ISP
- Thread starter Grizbear
- Start date
This was a long time ago. But if you haven't found out yet...
To find an ISP that supports v.92 use .
Juno/Netzero are supposed to be supporting v.92 now but I don't know to what level. AFAIC, if you don't have MOH, v.44 compression and PCM uplink, then you really don't have v.92 support...
. If you've found an ISP with full v.92 support and decent rates, let me know.
.bh.
He who dares not offend cannot be honest. -- Thomas Paine.
To find an ISP that supports v.92 use .
Juno/Netzero are supposed to be supporting v.92 now but I don't know to what level. AFAIC, if you don't have MOH, v.44 compression and PCM uplink, then you really don't have v.92 support...
. If you've found an ISP with full v.92 support and decent rates, let me know.
.bh.
He who dares not offend cannot be honest. -- Thomas Paine.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question