Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UUI Field
- Thread starter carlson
- Start date
UUI = User to User Information. Typically used by CTI apps to pass data. Depending on the CTI server and versions, this could be 32 bytes or 96 bytes on an R9.x switch.
ISDN PRI will allow UUI to pass from one Definity to another if the trunk UUI setting is set to shared. This, a call can be qualified by digit collection or IVR at one location, then BSR or LAI or otherwise route to the other location with the collected data allowing a CTI app on the other switch to collect the UUI and process the call accordingly.
ISDN PRI will allow UUI to pass from one Definity to another if the trunk UUI setting is set to shared. This, a call can be qualified by digit collection or IVR at one location, then BSR or LAI or otherwise route to the other location with the collected data allowing a CTI app on the other switch to collect the UUI and process the call accordingly.
- Status
Similar threads
