I have a customer with an S8700 who uses a Verify button to test trunks. It will give dial tone if the trunk is idle and if the trunk is active it gives a warning tone and barges in on the call. Works great on CO trunks but waves him off on ISDN-PRI trunks. Facility Access Code doesn't work on PRI trunks (unless they're set for Tie service) in my experience and I'm thinking the Verify button has the same limitation. Anyone familiar with this issue? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using trunk verify button 1
- Thread starter cwire
- Start date
-
1
- #2
AvayaTier3
Technical User
use isdn-testcall feature for testing isdn, TAC and FTC do not work unless the
facilities have Avaya at both ends of the isdn span.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
facilities have Avaya at both ends of the isdn span.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
- Status
