We have a RAS Server setup and have been using it quite happily for Dial-In. I have now been asked if we can use the same server for Dial-Out, I know this can be done but can't seem to find out how to do it. It seems to me that I need to be able to share a COM port or a Modem on the RAS Server so that it can be setup within the RAS service on the client, can somebody help please?<br><br>Yours Hopefully<br><br>Smudge
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using RAS Server to Dial Out instead of Dial In?
- Thread starter Smudgens
- Start date
If what you are wanting to do is enable demand dial routing for your clients through the RAS server, I would suggest you download and configure RRAS from Microsoft. It has much better routing capabilities, an easier interface, as well as the capability to enable Dial on Demand services.<br><br>dxd<br>
- Status
Similar threads
