Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using Procomm for a 2400 IPX and a 2000IPS

Status
Not open for further replies.
denv32

denv32

Technical User
Nov 14, 2012
4
US
Sorry for asking simple questions, but I am new to NEC and need to know if the products are compatible.
 
Sort by date Sort by votes
Procomm in what context? Each system has it's own NEC provided MAT software.
 
Upvote 0 Downvote
Using Procomm plus to dial in using a modem.
 
Upvote 0 Downvote
Used to use procom plus to dial into systems years ago! When it connected you would close procom without hanging up the modem then start the mat software! With the more modern mat software this isn't necessary!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

solidpro
  • Locked
  • Question
Anyone remember their first experience with 2000 IPS or IPX?
Replies
5
Views
453
solidpro
solidpro
phonetechallen32
  • Locked
  • Question
Sip for paging on a nec 9100
Replies
3
Views
424
CoralTech
CoralTech
rexytek
  • Locked
  • Question
NEC GT210 cannot make outside calls using a YEASTAR TG400 ip gsm gateway
Replies
0
Views
234
rexytek
rexytek
solidpro
  • Locked
  • Question
Last known firmware for NEC IP DECT G266 and G566 handsets?
Replies
1
Views
255
Daniel_RO
Daniel_RO
TXtac
  • Locked
  • Question
IP Integration from 2400 IPX to UM4730
Replies
1
Views
116
belevedere
belevedere

Part and Inventory Search

Sponsor

Back
Top