Using Norstar feature codes externally

[Michael.D]

Hi,

Is there a way of using feature codes (e.g.,Feature code 983 for voice mail software level) by calling into a Norstar externally?

Thanks
Michael

 

[Michael.D]

Hi All.

What are the most sought after Norstar and Merdian PBX cards/parts at the present time?

Regards,

Michael

 

[curlycord]

You have to know that the display on your mobile or home phone will not help you.

Feature codes are for internal use.
There is just 3 or 4 features maybe but only via DISA.

When posting [highlight #FCE94F]you should state which model of voicemail and which software version[/highlight] then we better answer/expand such as web browser use.

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[Michael.D]

Thanks for your reply Curlycord.

Are feature codes possible if done remotely, but using M7310, T7316, or M7324? phones?

Thanks you.

Michael

 

[curlycord]

Norstar/BCM use digital phones, they must be connected to the KSU.
For a person working off site they would use Citel's MCK Extender.
There is a few to choose from depending on amount of sets and application including fibre for a 0X16 module.

BCM is a Hybrid and uses both digital and IP phones.
Release 6 uses a Remote Worker feature which means IP sets can connect via port forwarding (securely) instead of setting a clunky VPN service.

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[Michael.D]

Thanks for the guidance.