Using NAT or not

[Mikecl]

I have a DMZ interface that need access to some of the servers on the inside network. If I Use a static (inside,dmz1) 192.168.10.1 192.168.10.1 this works ok for me. Does this mean NAT is disabled? will this address appear on the outside or other interfaces?

 

[yizhar]

HI.

I have not tested this, but if it works, then it seems OK to me.
Another option is to use nat 0 at the inside interface.

The static mapping you've created is visible only from DMZ .

For more info:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar