We are planing on moving one of our 2 cx600 to a DR site and currently we are thinking of using MirrorView to to do an Async between them utilizing our 2 T1 lines or T3 line if needed, I need to get an idea about the bandwidth mirror view use to do this so we can decide what impact our WAN connection will be impacted?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using MirrorView to sync 2 CX600
- Thread starter eyadkhadr
- Start date
This all depends on the throttle, amount of blocks, amount of bandwidth available, congestion on the link, etc.
This will differ from site to site, and by how much data there is. A T1 is probably going to take a few days or weeks depending on amount of data. I would highly recommend using a T3 and dedicate at least 60% of its line to the replication.
This will differ from site to site, and by how much data there is. A T1 is probably going to take a few days or weeks depending on amount of data. I would highly recommend using a T3 and dedicate at least 60% of its line to the replication.
- Status
