Using IPv6 w/ 7960 1

[RyanEOD]

How do I manually through the phone's interface set it's IP address to an IPv6 address? Heck I can't even figure out how to put a colon in. I have my Common Device Configuration's Allow Auto-Configuration for Phones set to off because I want to hard set it on each phone, and just can't figure out how to.

Thanks!

Ryan

 

[RyanEOD]

Any ideas?

 

[ADB100]

Not possible on 7960's (or 7940's). You need 7961's

 

[RyanEOD]

How would I do a : in a 7961?

Thanks!

 

[ADB100]

How would I do a : in a 7961?

IPv6 DHCP or IPv6 stateless autoconfiguration.....

 

[RyanEOD]

I can't do statics through the phone interface to hard set an IPv6 address?

 

[ADB100]

I have just had a look on a 7970 and there is a separate IPv6 menu. If I press Settings then Network Configuration, option 2 is IPv6 Configuration. From here you can disable DHCPv6 and configure an IPv6 address and one of the keys under the screen is the ':'

I think its probably the same on a 7941/7961 as they run similar firmware.

HTH

Andy

 

[ADB100]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/ipv6/endpnts.html

 

[RyanEOD]

Yep, got a 7961, and it worked like a champ. Thank you everyone!