using ipo as a conf bridge

[dalasace]

has anyone done this with a magix? what could the link be analog or t-1?

 

[ronromano]

You have to go T1

a for the quality and B for the limitation.

besides do you want to have all those analog trunks connected to analog stations?

 

[Bas1234]

You can use Qsig if the Merlin Magix this will support.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

Have a look at this link;

http://www.tek-tips.com/viewthread.cfm?qid=1418112&page=11

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[aarenot]

Exactly what is your specific application as there may be some ideas to consider.

While the IPO has conference bridge capabilities, there are considerations of routing calls to the bridge/s. When using the IPO, I have always done this in conjunction with VMPRO to provide menus, access, and control (security codes)for the bridge/s. Using the IPO without VMPRO for this is quite good, but you need to consider how you will manage the resources of the IPO, and access to the bridges.