Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using connected interface in a ip route statement?

Status
Not open for further replies.
deeze6

deeze6

Technical User
Sep 5, 2002
21
US
I noticed some people like to use the connected interface in a route statement as opposed to the address of the next hop router i.e.:
ip route 1.1.1.0 255.255.255.0 Serial0/0

How does this even work? To whom is the packet addressed? How does it know how to reach the next hop router?

Thanks,
Nick


 
Status
Not open for further replies.

Similar threads

PThomp3344
  • Locked
  • Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
178
bdk76
bdk76
jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
144
jarod_paris
jarod_paris
Collab_Guy
  • Locked
  • Question
Anyone using automation with their CUCM?
Replies
1
Views
98
kyle555
kyle555
stanlyn
  • Locked
  • Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
173
iggsterman
iggsterman
Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
123
Zero6
Zero6

Part and Inventory Search

Sponsor

Back
Top