Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using Cisco QuickVPN client behind WatchGuard Firebox

Status
Not open for further replies.

dphoneguy24

Technical User
Oct 30, 2003
793
US
We have a WatchGuard Firebox X550e (10.2) in our office.
We have a customer that has a Cisco (Linksys) RV042 small business router with client VPN setup.

Using Cisco QuickVPN client, I can connect to this customer ahead of our WG550e but behind it I can't.

Does anyone know what I need to do for a policy in the WG550e?

Thanks.
 
You need to add a custom policy. In this policy, add the ports the Cisco QuickVPN uses. And designate the FROM address and to address accordingly. Now your WG will allow traffic. You can also check the running log to see which ports are being blocked.

_________________________________
It works! But how?
VoiceByte System Engineer
 
The Cisco QuickVPN client typically connects to port 443 or 60443. Does your Watchguard have some existing outbound filtering for one (or both) of these ports?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top