I am wondering if I can split a 2811 VWIC-2MFT-t1 between two CallManager clusters. If so what are the commands and where would I do this in the 2811? Seems like I read somewhere that MGCP gateways had to belong to a single CM cluster but I am new to this.
I thought a solution would be to create an intercluster trunk, and did so. Everything works with one rather large caveat, I can't seem to get inbound calls through the original CM (with gateway)and to the endpoints on the CM that does not actually contain the gateway.
Any work arounds? I am attempting to pool PRI resources between my VoIP lab cluster and a near future production cluster. Also, this is interesting for survivability of PRIs down the road.
I thought a solution would be to create an intercluster trunk, and did so. Everything works with one rather large caveat, I can't seem to get inbound calls through the original CM (with gateway)and to the endpoints on the CM that does not actually contain the gateway.
Any work arounds? I am attempting to pool PRI resources between my VoIP lab cluster and a near future production cluster. Also, this is interesting for survivability of PRIs down the road.