Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Used Equipment Testing
- Thread starter mob46x
- Start date
Hello,
I guess the first thing you could do is power them up while connected to the console and see the routers and switches boot up.
If you do that successfully, then you may want to do a “show diagnostics post” and check the results from that output.
You can also do basic hardware test by connecting them up to a pc and see the interfaces come up okay.
All the above are just basic tests you could do, including leaving them running for sometime.
-HTH
I guess the first thing you could do is power them up while connected to the console and see the routers and switches boot up.
If you do that successfully, then you may want to do a “show diagnostics post” and check the results from that output.
You can also do basic hardware test by connecting them up to a pc and see the interfaces come up okay.
All the above are just basic tests you could do, including leaving them running for sometime.
-HTH
- Status
Similar threads
