Hello all,
I have been trying for the past week to mount a 2 TB usb storage device that I built (VENUS box with 4x 500 gb). It shows up when I type
cd /dev/rdsk
ls -l c*0 | grep usb
I then tried to mount it with this command (vold turned off)
mount -F pcfs /dev/dsk/c4t0d0s0:c /mnt
it says no device or address.....
so I typed iostat -En
got this
usb_sd1 Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: Product: Combine 4HDD0702 Revision: 1278 Serial No:
Size: 2000.43GB <2000431448064 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
I need HELP!!!
Thanks
Jared
I have been trying for the past week to mount a 2 TB usb storage device that I built (VENUS box with 4x 500 gb). It shows up when I type
cd /dev/rdsk
ls -l c*0 | grep usb
I then tried to mount it with this command (vold turned off)
mount -F pcfs /dev/dsk/c4t0d0s0:c /mnt
it says no device or address.....
so I typed iostat -En
got this
usb_sd1 Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: Product: Combine 4HDD0702 Revision: 1278 Serial No:
Size: 2000.43GB <2000431448064 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
I need HELP!!!
Thanks
Jared