intrigrant
Systems Engineer
Do the SIEMENS US systems have special 911 programming settings?
If it ain't dutch it ain't much
If it ain't dutch it ain't much
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
US Systems
- Thread starter intrigrant
- Start date
- Status
The 4000 has some additional 911 settings (Local ID Number) on the Basic3 tab but I believe it either requires compatibility or some special setup at the dispatch center. I was trying to mess with it when we got the system and the tech said it needed some kind of setup.
For the ultimate 911 solution when we upgrade our facilities we're looking at something like Red Sky that will report building, floor, room, etc when a 911 call goes out.
For the ultimate 911 solution when we upgrade our facilities we're looking at something like Red Sky that will report building, floor, room, etc when a 911 call goes out.
- Status
Similar threads
- Locked
- Question