schmiggity
Programmer
Hi,
Long time reader, first time poster
Ok heres my issue. I need to dial into my switch remotely and I have been trying to configure this modem with no luck. It's a US Robotics Courier V.Everything 56k w/ 10 dip switches. I have searched the forums and I couldnt find anything for this modem in particular. Everything I've found gave instructions for an 8 dip switch modem (i.e. Us Rob Sportster, etc..) I imagine that the "AT..." settings and "S.." are the same (please correct me if I'm wrong). I need to know where the DIP switches need to be set when putting in the command line and what the DIP switch settings need to be for the final configuration.
On a side note, thanks to everyone for all the useful tips you've posted in the past, this site is awesome.
Joe
Long time reader, first time poster
Ok heres my issue. I need to dial into my switch remotely and I have been trying to configure this modem with no luck. It's a US Robotics Courier V.Everything 56k w/ 10 dip switches. I have searched the forums and I couldnt find anything for this modem in particular. Everything I've found gave instructions for an 8 dip switch modem (i.e. Us Rob Sportster, etc..) I imagine that the "AT..." settings and "S.." are the same (please correct me if I'm wrong). I need to know where the DIP switches need to be set when putting in the command line and what the DIP switch settings need to be for the final configuration.
On a side note, thanks to everyone for all the useful tips you've posted in the past, this site is awesome.
Joe