URI Group in Avaya SBC-E

[redyps90210]

Hi guys,

I was trying to use the URI group in our Avaya SBC-E so I can segregate call types which goes to the same Signaling Interface.

I added the URI Group in the "Server Flows" under "End Point Flows", but it looks like it's not kicking in.

I already followed the below format as stated in the manual. Any idea what might be missing?

Plain
*@192.168.15.12
*@avaya.com

Dial Plan
9555XXXX@*
9555NXXX@avaya.com
011*@*

Regular Expression
[0-9]{3,5}\.user@domain\.com,
(simple|advanced)\-user[A-Z]{3}@.*

 

[montyzummer]

why not do this with system manager instead??

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[montyzummer]

also what does traceSBC show you when you apply the rules?

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[redyps90210]

If I do it on the System Manager, multiple type of calls are going to the same SBC interface. That's why I need to segregate them through the URI Group once the call arrive in the SBC.

I'm getting a 403 Forbidden from the SBC. It looks like it can't recognize the URI Group. If I remove them and test 1 call type, it was successful.