Apr 20, 2009 #1 lcns Technical User Jan 29, 2007 26 0 0 US I am trying to connect a remote LIM via CAT5 with a GJUG4 ROF1314247/4 and the L board is a GJUL4 ROF1314246/7 R3A. Does anyone know if this will work and if so what are the TX-RX pins on the boards?
I am trying to connect a remote LIM via CAT5 with a GJUG4 ROF1314247/4 and the L board is a GJUL4 ROF1314246/7 R3A. Does anyone know if this will work and if so what are the TX-RX pins on the boards?
Apr 21, 2009 #2 siouxes Technical User Aug 5, 2004 22 0 0 IT Yes it will work, but don't exagerate with distance... The pinout is the same as TLU76... the four pin on the right side of the connector. I hope is clear. BR Simone. Where MML commands can't, linux can. MXONE power. Upvote 0 Downvote
Yes it will work, but don't exagerate with distance... The pinout is the same as TLU76... the four pin on the right side of the connector. I hope is clear. BR Simone. Where MML commands can't, linux can. MXONE power.