urgent dump problem

[cuneyt2020]

When we checked the dump both of the rels are not valid, and gives " command lost" after trying to transfer to external backup
While checking Harddisk , we see no files in filesystem. DUBCI seems successful for REL1 and REL2 as there is no data on it.

We restarted program units drdh drdm bup fih but no solution
Also beside the printout below, we weren't able to fimoe and iosie, as it gives the same errors.
Here are the commands what we did.
We need urgent help..


[tt]

VERSION: LZY2035151/6/BC10C144/R6A

DATE: 10AUG05 TIME: 10:09:14
CLASS: 1
293 TRAFFIC RECORDING INTERNAL MEMORY DATA ERASED - MEMORY FULL
DATE TIME ALP NOIF UNIT INF1
09AUG05 19:17:23 4 1 0

294 TRAFFIC RECORDING INTERNAL MEMORY DATA ERASED - MIDNIGHT DUMP
DATE TIME ALP NOIF UNIT INF1
10AUG05 00:11:00 7 1 0

CLASS: 0
303 DATA LINK ALARM
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2
09AUG05 19:08:49 1 1 SLP60 007-0-40-00 57 256 10
RDATE RTIME
09AUG05 19:09:59
303 DATA LINK ALARM
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2
10AUG05 00:51:24 2 224 SLP60 007-0-40-00 57 256 7
RDATE RTIME
10AUG05 00:51:24
303 DATA LINK ALARM
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2
10AUG05 00:51:28 3 224 SLP60 007-0-40-00 57 256 0
RDATE RTIME
10AUG05 00:52:37
89 LOST SIGNALS IN THE GROUP SWITCH
DATE TIME ALP NOIF GSSIDE
10AUG05 09:27:52 5 2 0
RDATE RTIME
10AUG05 09:30:56
24 FAULTY PCM LINK (GJU)
DATE TIME ALP NOIF GSSIDE GSM
10AUG05 09:56:56 6 4 0 0
RDATE RTIME
10AUG05 09:58:19

END
<FISCP:IODEV=SYSDSK1;
NOT ACCEPTED
DEVICE NOT EXIST

<FISCP:IODEV=SYSDISK1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 2067 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED

<FISCP:IODEV=SYSDISK2;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 2067 MBYTES
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED

<FIDAPATH=/SYSN/USR1/ACS/TM/*.*;
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED

<FIDAPATH=/SYSN/USR1;
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED






<HImdp:lim=1;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
11:42:10 10AUG05
DIAGNOSTICS FROM LIM 001

TIME DATE ERROR CODE
11:26:38 10AUG05 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 020035F4
ENTER
SWSW A-LEVEL SIGNAL RELPATEXC (H'009F)
FROM CMPS1 (H'2D2) EXE A IN LIM 001
TO CMPS19 (H'2E4) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 2
WITH 0 1 2 3 4 5 6 7 8 9
000 F7 18

SEND
SWSW A-LEVEL SIGNAL ENTNOPSTA (H'0081)
FROM CMPS19 (H'2E4) EXE A IN LIM 001
TO ELP7 (H'1A0) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF 7B 02 FF

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 27 2E 02 00 0A 1E

TIME DATE ERROR CODE
11:26:33 10AUG05 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 02007266
ENTER
SWSW A-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS12 (H'2DD) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 EC 64

SEND
SWSW A-LEVEL SIGNAL ENTSPESTA (H'0044)
FROM CMPS12 (H'2DD) EXE A IN LIM 001
TO ELP7 (H'1A0) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 12
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF 7B 00 00 00 01 01 FF 00
010 0F 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 53 6E 02 00 23 FA

TIME DATE ERROR CODE
11:25:31 10AUG05 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200FCBA
ENTER
SWSW B-LEVEL SIGNAL WRITE (H'0028)
FROM DRDM (H'01F) EXE A IN LIM 001
TO FIP (H'04F) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 16
WITH 0 1 2 3 4 5 6 7 8 9
000 FF 00 04 00 30 00 00 00 04 00
010 00 03 F4 01 00 1F


TIME DATE ERROR CODE
11:05:59 10AUG05 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200FCBA
ENTER
SWSW B-LEVEL SIGNAL WRITE (H'0028)
FROM DRDM (H'01F) EXE A IN LIM 001
TO FIP (H'04F) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 16
WITH 0 1 2 3 4 5 6 7 8 9
000 FF 00 04 00 30 00 00 00 04 00
010 00 03 F4 01 00 1F


END
<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
NOT VALID NOT VALID
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 11:24 10AUG05 11:05 10AUG05
2 11:24 10AUG05 11:05 10AUG05
3 11:24 10AUG05 11:05 10AUG05
4 11:24 10AUG05 11:05 10AUG05
5 11:24 10AUG05 11:05 10AUG05
6 11:24 10AUG05 11:05 10AUG05
7 11:24 10AUG05 11:05 10AUG05
8 11:24 10AUG05 11:05 10AUG05
9 11:24 10AUG05 11:05 10AUG05
10 11:24 10AUG05 11:05 10AUG05
11 11:24 10AUG05 11:05 10AUG05
12 11:24 10AUG05 11:05 10AUG05
13 11:24 10AUG05 11:05 10AUG05
14 11:24 10AUG05 11:05 10AUG05
15 11:24 10AUG05 11:05 10AUG05
16 11:24 10AUG05 11:05 10AUG05
17 11:24 10AUG05 11:05 10AUG05
18 11:24 10AUG05 11:05 10AUG05
19 11:24 10AUG05 11:05 10AUG05
20 11:24 10AUG05 11:05 10AUG05
21 11:24 10AUG05 11:05 10AUG05
22 11:24 10AUG05 11:05 10AUG05
23 11:24 10AUG05 11:05 10AUG05
24 11:24 10AUG05 11:05 10AUG05

END

<DUBCIIR=REL1;
ORDERED
<DUBCIIR=REL1; ;
NOT ACCEPTED
COMMAND BUSY

SPONTANEOUS PRINTOUT

RESULT OF EXTERNAL BACKUP CHECK

RELOAD DIRECTORY REL1
SUCCESSFUL
END
<DUBCIIR=REL2; ;
ORDERED

SPONTANEOUS PRINTOUT

RESULT OF EXTERNAL BACKUP CHECK

RELOAD DIRECTORY REL2
SUCCESSFUL
END
<;
SYNTAX ERROR
<;
SYNTAX ERROR
<FIMOE:SUBFS=SYSSUBFS11;
NOT ACCEPTED
SCSI BUS NOT BLOCKED

<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED

<BLEQe:EQU=1-0-70-0;
EXECUTED
<RFPUI:UNIT=DRDH,LIM=1;
RFPUI:UNIT=DRDH,LIM=1;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 DRDH

EXECUTED

<ALLOP;
ALARM LOG
IDENTITY: YKB-TELETEL
VERSION: LZY2035151/6/BC10C144/R6A

DATE: 10AUG05 TIME: 11:45:53
CLASS: 0
56 THE SYSTEM DOES NOT HAVE AN ACCESSIBLE BACKUP
DATE TIME ALP NOIF EQU BRDID
10AUG05 11:43:56 1 1 001-0-70-00 106
RDATE RTIME
10AUG05 11:44:19
51 DEVICE BOARD INDIVIDUAL MANUALLY BLOCKED
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:43:59 2 1 NIP 001-0-70-00 106 0
RDATE RTIME
10AUG05 11:44:19

END
<ALREI;
EXECUTED
<ALLOP;
ALARM LOG
IDENTITY: YKB-TELETEL
VERSION: LZY2035151/6/BC10C144/R6A

DATE: 10AUG05 TIME: 11:46:01
NO ALARMS IN LOG

END
<HImdp:lim=1;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
11:46:04 10AUG05
DIAGNOSTICS FROM LIM 001

TIME DATE ERROR CODE
11:26:38 10AUG05 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 020035F4
ENTER
SWSW A-LEVEL SIGNAL RELPATEXC (H'009F)
FROM CMPS1 (H'2D2) EXE A IN LIM 001
TO CMPS19 (H'2E4) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 2
WITH 0 1 2 3 4 5 6 7 8 9
000 F7 18

SEND
SWSW A-LEVEL SIGNAL ENTNOPSTA (H'0081)
FROM CMPS19 (H'2E4) EXE A IN LIM 001
TO ELP7 (H'1A0) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF 7B 02 FF

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 27 2E 02 00 0A 1E

TIME DATE ERROR CODE
11:26:33 10AUG05 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 02007266
ENTER
SWSW A-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS12 (H'2DD) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 EC 64

SEND
SWSW A-LEVEL SIGNAL ENTSPESTA (H'0044)
FROM CMPS12 (H'2DD) EXE A IN LIM 001
TO ELP7 (H'1A0) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 12
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF 7B 00 00 00 01 01 FF 00
010 0F 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 53 6E 02 00 23 FA

TIME DATE ERROR CODE
11:25:31 10AUG05 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200FCBA
ENTER
SWSW B-LEVEL SIGNAL WRITE (H'0028)
FROM DRDM (H'01F) EXE A IN LIM 001
TO FIP (H'04F) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 16
WITH 0 1 2 3 4 5 6 7 8 9
000 FF 00 04 00 30 00 00 00 04 00
010 00 03 F4 01 00 1F


TIME DATE ERROR CODE
11:05:59 10AUG05 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200FCBA
ENTER
SWSW B-LEVEL SIGNAL WRITE (H'0028)
FROM DRDM (H'01F) EXE A IN LIM 001
TO FIP (H'04F) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 16
WITH 0 1 2 3 4 5 6 7 8 9
000 FF 00 04 00 30 00 00 00 04 00
010 00 03 F4 01 00 1F


END
<RFPUI:UNIT=BUP,LIM=1;
RFPUI:UNIT=BUP,LIM=1;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 BUP

EXECUTED

<FIFTI:SUBFS=SYSSUBFS11;
FUNCTION TEST RESULT
NOT ACCEPTED
SUBFILE SYSTEM MOUNTED

<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED

<BLEQe:EQU=1-0-70-0;
EXECUTED
<ALREI;
EXECUTED
<ALLOP;
NOT ACCEPTED
COMMAND BUSY
<ALLOP;
ALARM LOG
IDENTITY: YKB-TELETEL
VERSION: LZY2035151/6/BC10C144/R6A

DATE: 10AUG05 TIME: 11:49:34
CLASS: 4
269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 1 1 ELP7 018-0-50-00 27 32789

269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 2 1 ELP7 016-0-50-00 27 32789

269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 3 1 ELP7 017-0-50-00 27 32789


END
<DUSYI;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE
SUCCESSFUL
WAIT FOR DUMP TO LOCAL BACKUP
RESULT OF DUMP TO LOCAL BACKUP
SUCCESSFUL
RESULT OF DUMP TO EXTERNAL BACKUP

COMMAND LOST

<RFPUI:UNIT=FIH,LIM=1;
RFPUI:UNIT=FIH,LIM=1;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 FIH

EXECUTED

<ALLOP;
ALARM LOG
IDENTITY: YKB-TELETEL
VERSION: LZY2035151/6/BC10C144/R6A

DATE: 10AUG05 TIME: 12:01:54
CLASS: 0
269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 1 1 ELP7 018-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:31
269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 2 1 ELP7 016-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:31
269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:49:26 3 1 ELP7 017-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:31
270 DIGITAL TRUNK, BIT ERROR IN FRAME SYNCHRONIZATIION WORD
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:51:31 4 1 ELP7 018-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:34
270 DIGITAL TRUNK, BIT ERROR IN FRAME SYNCHRONIZATIION WORD
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:51:31 5 1 ELP7 016-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:34
270 DIGITAL TRUNK, BIT ERROR IN FRAME SYNCHRONIZATIION WORD
DATE TIME ALP NOIF UNIT EQU BRDID INF1
10AUG05 11:51:31 6 1 ELP7 017-0-50-00 27 32789
RDATE RTIME
10AUG05 11:51:34

END
<ALREI;
EXECUTED
<ALLOP;
ALARM LOG
IDENTITY: YKB-TELETEL
VERSION: LZY2035151/6/BC10C144/R6A



DATE: 10AUG05 TIME: 12:02:04
NO ALARMS IN LOG

END
<FIMOE:SUBFS=SYSSUBFS11;
NOT ACCEPTED
SCSI BUS NOT BLOCKED

<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
NOT ACCEPTED
STANDARD WORD NOT YET ASSIGNED


[/tt]

 

[whosrdaddy]

the fact that you get "STANDARD WORD NOT YET ASSIGNED" on the FI commands worries me, was your system updated recently??

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[cuneyt2020]

Hi dady,
No , no update was done... Last two dump was having " command lost" during transfer to external backup.
Probably it had problem because of traffic records. But not understood the problem yet.
Why are you worried?

 

[rfpui]

How look printout of IODDP?

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[whosrdaddy]

I think fastest and easiest way out of this is to do a full system reload...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[cuneyt2020]

Hi,
After restarting NIP and FIP, now we can execute fimoe, iosie and fiscp ,ficri commands, We changed the hardisks rel1 and rel2. But after fimoi command,it's as follows.

[tt]

<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
EXECUTED

<FIMOE:SUBFS=TM-SF;
NOT ACCEPTED
SUBFILE SYSTEM NOT FOUND

<FIMOE:SUBFS=SYSSUBFS21;
EXECUTED

<IOSIE:IODEV=SYSDISK1,NODE=SYSN;
EXECUTED

<IOSIE:IODEV=SYSDISK2,NODE=SYSN;
EXECUTED

<IOSII:IODEV=SYSDISK1,NODE=SYSN,SIPOS=3,SUBFS=SYSSUBFS11;
NOT ACCEPTED
NO DISK IS CONNECTED

<IOSII:IODEV=SYSDISK2,NODE=SYSN,SIPOS=4,SUBFS=SYSSUBFS21;
NOT ACCEPTED
NO DISK IS CONNECTED

<IOSII:IODEV=SYSDISK1,NODE=SYSN,SIPOS=3,SUBFS=SYSSUBFS11;
NOT ACCEPTED
NO DISK IS CONNECTED

<IOSII:IODEV=SYSDISK1,NODE=SYSN,SIPOS=3,SUBFS=SYSSUBFS11;
EXECUTED

<IOSII:IODEV=SYSDISK2,NODE=SYSN,SIPOS=4,SUBFS=SYSSUBFS21;
EXECUTED

<FICRI:SUBFS=SYSSUBFS11,SIZE=64;
FICRI:SUBFS=SYSSUBFS11,SIZE=64;
SURE? (YES/NO)
<y;
EXECUTED

<FICRI:SUBFS=SYSSUBFS21,SIZE=64;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
SURE? (YES/NO)
<y;
EXECUTED

<FICRI:SUBFS=TM-SF,SIZE=64;
FICRI:SUBFS=TM-SF,SIZE=64;
SURE? (YES/NO)
<y;
NOT ACCEPTED
SUBFILE SYSTEM NOT FOUND

<FIMOI:SUBFS=SYSSUBFS11;
NOT ACCEPTED
DEVICE BOARD IS BLOCKED

<FIMOI:SUBFS=SYSSUBFS21;
NOT ACCEPTED
DEVICE BOARD IS BLOCKED

<FIMOI:SUBFS=TM-SF;
NOT ACCEPTED
UNREASONABLE VALUE
PATH
<FIMOE:SUBFS=TM-SF;
NOT ACCEPTED
SUBFILE SYSTEM NOT FOUND

<BLEQE:EQU=1-0-70-0;
EXECUTED
<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
EXECUTED

<FIMOE:SUBFS=TM-SF;
NOT ACCEPTED
SUBFILE SYSTEM NOT FOUND

<FIMOE:SUBFS=SYSSUBFS21;
EXECUTED

<IOSIE:IODEV=SYSDISK1,NODE=SYSN;
EXECUTED

<IOSIE:IODEV=SYSDISK2,NODE=SYSN;
EXECUTED

<IOSII:IODEV=SYSDISK1,NODE=SYSN,SIPOS=3,SUBFS=SYSSUBFS11;
EXECUTED

<IOSII:IODEV=SYSDISK2,NODE=SYSN,SIPOS=4,SUBFS=SYSSUBFS21;
EXECUTED

<FICRI:SUBFS=SYSSUBFS11,SIZE=64;
FICRI:SUBFS=SYSSUBFS11,SIZE=64;
SURE? (YES/NO)
<Y;
EXECUTED

<FICRI:SUBFS=TM-SF,SIZE=64;
FICRI:SUBFS=TM-SF,SIZE=64;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
SUBFILE SYSTEM NOT FOUND

<FICRI:SUBFS=SYSSUBFS21,SIZE=64;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
SURE? (YES/NO)
<Y;
EXECUTED

<FIMOI:SUBFS=SYSSUBFS11;
NOT ACCEPTED
DEVICE BOARD IS BLOCKED

<FIMOI:SUBFS=SYSSUBFS21;
NOT ACCEPTED
DEVICE BOARD IS BLOCKED

<?oddp;
SYNTAX ERROR
<ioddp;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU SIPOS TYPE/USAGE STATUS AUTH
SYSN - 001-0-70 - - IN SERVICE
SYSN SYSDISK1 001-0-70-0 3 SEAGATE MAN BLOCK
SYSSUBFS11
SYSN SYSDISK2 001-0-70-0 4 SEAGATE MAN BLOCK
SYSSUBFS21
SYSN SYSTERMINAL 001-0-70-1 - MML - 7
SYSN SYSTERMINAL1 001-0-70-2 - MML - 7
SYSN SYSTERMINAL2 001-0-70-3 - MML - 7
SYSN LIM1ETH 001-0-70-4 - NETWORK/OUT IN SERVICE
SYSN LIM1MML 001-0-70-4 - NETWORK/MML - 7
NIULIM1ETH - 001-0-50 - - IN SERVICE
NIULIM1ETH LIM1CTI 001-0-50-4 - NETWORK/OUT IN SERVICE
NIULIM2 - 002-0-70 - - IN SERVICE
NIULIM2 LIM2ETH 002-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM2 LIM2MML 002-0-70-4 - NETWORK/MML - 7
NIULIM3 - 003-0-70 - - IN SERVICE
NIULIM3 LIM3ETH 003-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM3 LIM3MML 003-0-70-4 - NETWORK/MML - 7
NIULIM4 - 004-0-60 - - IN SERVICE
NIULIM4 LIM4ETH 004-0-60-4 - NETWORK/OUT IN SERVICE
NIULIM4 LIM4MML 004-0-60-4 - NETWORK/MML - 7
NIULIM5 - 005-0-70 - - IN SERVICE
NIULIM5 LIM5ETH 005-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM5 LIM5MML 005-0-70-4 - NETWORK/MML - 7
NIULIM6 - 006-1-70 - - IN SERVICE
NIULIM6 NIULIM6 006-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM7 - 007-0-70 - - IN SERVICE
NIULIM7 LIM7ETH 007-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM7 LIM7MML 007-0-70-4 - NETWORK/MML - 7
NIULIM8 - 008-1-70 - - IN SERVICE
NIULIM8 NIULIM8 008-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM9 - 009-0-70 - - IN SERVICE
NIULIM9 LIM9ETH 009-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM9 LIM9MML 009-0-70-4 - NETWORK/MML - 7
NIULIM10 - 010-1-70 - - IN SERVICE
NIULIM10 NIULIM10 010-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM11 - 011-0-70 - - IN SERVICE
NIULIM11 LIM11ETH 011-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM11 LIM11MML 011-0-70-4 - NETWORK/MML - 7
NIULIM12 - 012-0-60 - - IN SERVICE
NIULIM12 LIM12ETH 012-0-60-4 - NETWORK/OUT IN SERVICE
NIULIM13 - 013-0-70 - - IN SERVICE
NIULIM13 NIULIM13 013-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM14 - 014-0-42 - - IN SERVICE
NIULIM14 LIM14ETH 014-0-42-4 - NETWORK/OUT IN SERVICE
NIULIM14 LIM14MML 014-0-42-4 - NETWORK/MML - 7
EVM - 014-1-50 - - IN SERVICE
EVM EVM-IPU-TEST1 014-1-50-1 - MML - 7
EVM EVM-IPU-TEST2 014-1-50-2 - MML - 7
NIULIM15 - 015-0-70 - - IN SERVICE
NIULIM15 LIM15ETH 015-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM15 LIM15MML 015-0-70-4 - NETWORK/MML - 7
NIULIM16 - 016-1-70 - - IN SERVICE
NIULIM16 NIULIM16 016-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM17 - 017-0-70 - - IN SERVICE
NIULIM17 LIM17ETH 017-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM17 LIM17MML 017-0-70-4 - NETWORK/MML - 7
NIULIM18 - 018-1-70 - - IN SERVICE
NIULIM18 NIULIM18 018-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM19 - 019-0-70 - - IN SERVICE
NIULIM19 LIM19ETH 019-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM19 LIM19MML 019-0-70-4 - NETWORK/MML - 7
NIULIM20 - 020-1-70 - - IN SERVICE
NIULIM20 NIULIM20 020-1-70-4 - NETWORK/OUT IN SERVICE
NIULIM21 - 021-0-70 - - IN SERVICE
NIULIM21 LIM21ETH 021-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM21 LIM21MML 021-0-70-4 - NETWORK/MML - 7
NIULIM22 - 022-0-42 - - IN SERVICE
NIULIM22 LIM22ETH 022-0-42-4 - NETWORK/OUT IN SERVICE
NIULIM23 - 023-0-70 - - IN SERVICE
NIULIM23 LIM23ETH 023-0-70-4 - NETWORK/OUT IN SERVICE
NIULIM24 - 024-1-70 - - IN SERVICE
NIULIM24 NIULIM24 024-1-70-4 - NETWORK/OUT IN SERVICE
END

<bldbe:bpos=1-0-70,allfm=yes;
EXECUTED
<BLEQE:EQU=1-0-70-0;
EXECUTED
<BLEQI:EQU=1-0-70-0;
EXECUTED
<FIMOI:SUBFS=SYSSUBFS11;
NOT ACCEPTED
MOUNT POINT FOR A SUBFILE SYSTEM

<FIMOI:SUBFS=SYSSUBFS21;
NOT ACCEPTED
MOUNT POINT FOR A SUBFILE SYSTEM

[/tt]
Is there anything to do except reloading?

 

[whosrdaddy]

This is not good!!! you managed to format both harddisks so a reload is out of the question!!! I hope for your sake you have at least a safety backup!

okay, let's try to fix it:

try to reset the NIU board (pull it out) at 1-0-70.

manage to get a NEW (third) harddisk and connect only THIS disk
at SIPOS 3 and execute these MML commands :

[tt]
BLEQI:EQU=1-0-70-00;
/* follow lines could give errors, ignore */
FIMOE:SUBFS=TM-SUBFS;
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
FIMOE:SUBFS=SYSSUBFS31;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;
/* end ignore */
IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS21&TM-SUBFS;
FICRI:SUBFS=SYSSUBFS11,size=64;
Y;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
Y;
FICRI:SUBFS=TM-SUBFS,SIZE=64;
Y;
FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;
FIMOI:SUBFS=TM-SUBFS,PATH=/SYSN/USR1/ACS/TM;
BLEQE:EQU=1-0-70-0,ALLFM=YES;
[/tt]

if you didn't receive any error, launch a dump with DUSYI; and pray it works...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[cuneyt2020]

Hi dady,
This is what we did yesterday, and during first dump operation 2 lims were restarted and at that time support center called us and advised us to change the NIU board in lim1 fw. from r9A to r15a before giving dump again.
We had 24 NIU boards and there were some other boards with r15a firmware. By the recommendation of support center we swapped these boards. But that operation annoyed system about the licence issue. (EIC mismatch) So we again reswapped the boards. But again nothing happened and IODevice error alarm came. And Even now the board fails. And after this, support center advised us to fix this problem!! and told us to call him after we fixed this problem. (!)

After an hour we again tried dump operation with a " failed board " and it dumped successfully. But support center gave a present to us such as a failed NIU board connected to the hard disks.

Rgrds.