Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading SP5 to SP8

Status
Not open for further replies.

tmattson

IS-IT--Management
Jul 3, 2001
125
US
I am currently on 6.5 sp5 and would like to move up to sp8 and was just looking for any advice or comments about doing so.

Thanks to all
 
Noticed there are many patches for SP8 any advice concerning these would be helpful as well.

Thanks again
 
Read this first:
It's been a long time since I've done Novell service packs on 6.5, but the real tip is to read the README that's included for any warnings or cautions or prerequisites.

I'll tell you three things to do regardless.
1. DS Repair until no errors. Allow server to run for a while after that (20 minutes).
2. REM out unnecessary items in Autoexec.ncf so as to be running with a minimum. Not system stuff, but NDPS printing and third party applications (backup programs???) + GroupWise, anti-virus, etc.
3. Reboot and make sure anything extra IS turned off.


As for the other patches, you have to read each one that appears chronologically after SP8 and see if it applies to you. Especially important are ones that mention problems with things that you are running or DS or core items. It's a pain, but I don't know another way of doing it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top