Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading RISC CPU cards

Status
Not open for further replies.

telecoman

Technical User
Aug 25, 2007
34
GB
Hi all,
I'm still having problems with this one!
I've changed the two 40-pin EPROM's on a 871/1/06796/010 CPU card to those from a 871/1/06796/011 CPU (BA687 on 010 & BA804 on 011) and tested the card in an iSDX-S but still get the red LED on the UPI indicating software error!
Is there anything else that I need to do eg:- change the little 8-pin chip IC109? What should the DIP switch settings be?
Are the two 40-pin EPROM's the same for all the cards suffix 001, 011 and 021? - they are all the same numbers for the suffix 000, 010 and 020 cards!
The little 8-pin chips IC109 are the same number on suffix 000 and 010 cards but different on the 020 card(BA688 on 000 & 010, BA772 on 020).
Help again pleeese gentlemen!!!!?
Best regards to everyone,
Telecoman.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top