upgrading IOS on Cisco 1600

[chagme]

I need to upgrad the IOS on a used Cisco 1600, because the version I have won't do NAT. I believe I need Version 12.0.
I've been to the Cisco site, but couldn't get to any software.

If I could get the Feature Pack CD from the original owner, would that give me access to the Cisco site where I can download the upgrade? Any suggestions would be appreciated.

Here's the system info from the router:
=======================================
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-Y-M), Version 11.2(18)P, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 12-Apr-99 15:29 by ashah
Image text-base: 0x02005000, data-base: 0x0232C82C

cisco 1601 (68360) processor (revision C) with 6144K/2048K bytes of memory.
Processor board ID 16973009, with hardware revision 00000002
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface(s)
1 serial(sync/async) network interface(s)
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)

 

[ChrisAC]

To download new software you need a CCO login from Cisco. You can get this if you have a support contract with Cisco or if you are a CCIE!!!

Speak to your supplier and see if they can help you.

Chris.
************************
Chris Andrew, CCNA
chrisac@gmx.co.uk
************************

 

[wybnormal]

At times you can find the Option Packs of various types up for sale on Ebay.. buyer beware.. you need to ask all the right questions before you get it.

MikeS
Find me at

http://www.packetattack.com

"The trouble with giving up civil rights is that you never get them back"

 

[chagme]

Thanks for your responses.
I finally realized I could download the file I needed from another Cisco 1601 I have access to.