Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Upgrading from a BCM 2.5 to a 4.0 1
- Thread starter Runako
- Start date
-
1
- #2
acewarlock
Technical User
2.5 to 3.0 to 3.5 to 3.7 to 4.0
you need to do all the upgrades to upgrade the NT portion.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
you need to do all the upgrades to upgrade the NT portion.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
