Upgrading Flash Lite

[atdjr123]

Worked on upgrading Flash Lite today. I performed a reinstall, and once system started resetting/ powered down/ inserted 1.7/ powered up and waited for reboot. I was able to flush out the Lite but was not able to get the Flash working w/ 2.0. I'm good w/ the 1.7 but was just wondering if I needed to go to 1.9 B4 2.0 or could the 2.0 be corrupt????

http://www.voiceconnectplus.com

Voice Connect Plus, Inc.
have a great day and a better tomorrow

 

[misseditbythatmuch]

I would suspect the 2.0 card given what you have laid out.

The steps you took all sound correct. You can check for step-by-step details in this thread and the thread referenced within it.

http://www.tek-tips.com/viewthread.cfm?qid=1606999

 

[allworxguy]

1.9 and above require you to set the Feature code range via F903. Did you try that? F983 won't work until you set the range.

Marv

http://www.telemarv.ca

 

[atdjr123]

Can't recall if I did or not. Will try again later. Thanks

http://www.voiceconnectplus.com

Voice Connect Plus, Inc.
have a great day and a better tomorrow