Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading CICS 4.0 to 7.1 2

Status
Not open for further replies.

curlycord

Programmer
Sep 22, 2002
14,187
Toronto, Canada
CICS 4.0 Standard (S)

I need a refresher...
Need to keep programming if possible.

My past thoughts were to upgrade 4.0 to 4.1 then 6.1 then 7.1 ...maybe that was just MICS.
However 6.0 Install guide states it's ok to go from 4.0 to 6.0
However 6.1 Install guide makes no mention of any previous version or any which tool/software order etc which I find strange.

So that would mean I can go from 4.0 to 6.1 then 7.1?

As for versions can I go from 4.0 S to 6.0 SI or SIP as an example? as long as not backwards?





________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
I'm reading a 7.0 upgrade guide.

There is an upgrade tool that will take you from 4.0 to 7.x.

No mention of using software onlt. I Think if you do it by just swapping software you have to stop at 6.0 because of the line numbering change that occurs at 6.1

Marv ccna

 
I was just reminded about this post...thanks jsaad lol.
But to update properly I upped straight from 4.0 to 7.1 and worked, took less time then I thought too.


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top