Highlights
Vendor
Would you say it is more time consuming rather than difficult to upgrade a BCM50 R2 to R6 or visa versa? This is a unit that is not currently in service but I want to bring it up to R6 and install it from scratch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Upgrading BCM50 R2 to R6 - Difficult or Just Time Consuming?
- Thread starter Highlights
- Start date
- Status
Firebird Scrambler
Systems Engineer
As the unit isn't in service it will just be time consuming. Personally, if you already have the release 6.0 keycodes, then I think you will have to do two upgrades via release 3.0. At least you can do it and leave it running whilst doing other work.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
Highlights
Vendor
Yes I see that there is a 2.0 to 3.0 then to 6.0 available.
- Status
Similar threads
- Question
- Locked
- Question