Upgrading a NAM

[Roldan]

I'm upgrading a NAM from 4.0.04e to 4.1, my question is do I need Keycodes. I've got a NVM 4.1 software package (part # NTAB3388) which came with a security keycode installation diskette, is the keycode not on this diskette?

 

[hawkflorida]

No Key needed. Just the boot disk and a back pack

Check out being able to edit COS from the phone.
MB-AA-OTHER choose MB.... then enter 1 and you will see COS: ,at this point just enter the number you want to edit. Pretty cool!
Consulting -
"If You're Not A Part Of The Solution, There's Good Money To Be Made In Prolonging The Problem."

 

[Arr]

Roldan,

Just for kicks.. make sure you have both a customer and a Secur back up of your existing set up before you upgrade. It is as easy as Redhawkfla says. BUT BACK IT UP FIRST!!! You can't recover your config with out the Secur disk at a minimum.

Good luck on this one ... just go by the numbers.

PhM

 

[hawkflorida]

Good practice and advice, as always Arr....
Consulting -
"If You're Not A Part Of The Solution, There's Good Money To Be Made In Prolonging The Problem."

 

[Roldan]

Thanks guys, I thought I was going to need a keycode, but at the same time I was hoping the keycode would be on the diskette. Thanks again