Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading 2 sites 1

Status
Not open for further replies.

mojoputter

Technical User
Oct 11, 2005
1,123
US
I have a customer with IP500V2 8.1.85 at site A and 8.1.69 at Site B, the plan is to upgrade both sites to R10.
Site A has a PRI that handles the incoming and outgoing calls for both sites, with SCN between the sites. It also has VMPro for both sites.

The question is can I upgrade site B to R10 then a couple days later upgrade site A, will everything still function..?

The end is near!
 
Technically, only 1 release difference between SCN's is supported. However, I've had sites with greatly varying firmware levels, and it has worked just fine. Just know any features will default to the lowest supported version.

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top