Upgrade to PRI

[wellco]

Have a Legend w/ Magix (clamshell) and we have to upgrade to PRI..they currently have T1 w/ 100d board.
Any major changes we need to do to accomplish this change?
Any help would be appreciated. Thanks

 

[merlinman]

There will be a GREAT DEAL of programming that needs to be done.

Also, you need to determine if you have ANY TYPE of 016 Modules in the existing config.

If not, no problem.

Some 100D modules have problems with PRI & 016 Mods.

 

[wellco]

Thanks for the update...could you give me an idea of what will need to be changed in the switch as far as program changes...I will check out the 100d vs 016 card situation today...thanks again

 

[Pepperz]

Hey MM: What are the symptoms of the 016/100DCD issues?

Pepperz at newper dot net

 

[merlinman]

The pipe will try to come up, almost come up, sometimes come up, and then DIE!

 

[Pepperz]

MM you ever see a 100 DCD "cause" TDL extensions to fail?

Pepperz at newper dot net

 

[merlinman]

I have it on GOOD AUTHORITY that the DCD is THE ONLY Late model card that DOES NOT CAUSE A FAILURE!

 

[Pepperz]

?@#$%?@#$?$?

Pepperz at newper dot net