Upgrade the VOIB 1

[scorpiopy]

How can I make the upgrade of a IPLDK VOIB-60
I understand that can be updated by entering the Web browser but want to update the ROM image I cant´n updated

Greetings!


Como puedo realizar el upgrade de la VOIB en una IPLDK-60
Tengo entendido que se puede actualizar entrando por Web Browser pero al querer actualizar la imagen ROM no me actualiza

Saludos!!

 

[doktor]

If it was theipLDK-100/300, you would just have to browse to the ip address of the VOIB/VOIBE, and enter the password of PGM340 (the password must be a 4-6 digit number, and it has to be set!!). After you have been logged on to the VOIB/VOIBE, just search (browse) for the firmware, and click on the UPLOAD web button.
After the upgrade you must reset the VOIB/VOIBE and the MPB (processor board of the PBX/KSU).

BUT now it is ipLDK-60...
Maybe Mr. MorenoT know of a better describtion...?

///doktor

 

[doktor]

Just an example:

E.g.: Enter "http:// 10.152.11.11" in your browser:

1.
VoIP Card Remote Upgrade
Enter password --> This is the trace password of PGM340.

2.
After logon, then you see this text:

VoIP Rom Image Upgrade
VoIP Remote Upgrade - Firmware Ver. D.2Bh++
Load binary file !! Browse for the file - and Upgrade!

After the upgrade you must reset the VOIB/VOIBE and the MPB (processor board of the PBX/KSU).




///doktor

 

[scorpiopy]

Ok thank´s I will wait for the response of MR. Moreno
thank Doktor

 

[morenot]

Doktor:
You are right!!
That procedure is equal for ipldk 60.
I know something about ipldk 60, but doktor have experience with the rest of ipldk family..
Some procedures are similar between versions of ipldk

Scorpiopy:
El doctor esta correcto
el procedimiento es igual para el ipldk 60
Conozco algo del ipldk 60, pero el doktor tiene experiencia con el resto de la familia del ipldk.
Algunos procedimientos son similares entre las versiones del ipldk.

Saludos...

JLMT//