Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrade path: Option 11C Rls.25 to 6.0

Status
Not open for further replies.

Kaloli

Technical User
Feb 25, 2010
19
0
0
US
Hey Guys,

Have a customer looking to upgrade from Opt 11C rls. 25 to 6.o. What's the upgrade path look like? I have some Nortel CS1000 training but not much hands on experience. Any help from you would be appreciated.

Thanks
 
if your staying tdm, pretty clean.. look at the planning and eng manuals.. they have each step

john poole
bellsouth business
columbia,sc
 
They have IP phones and digital sets.
 
Very straight forward, depending on number of sets, just need a MGC plus a Co-Res CP-PM is below 1000 users, therefore you require only one free slot, more then a 1000 users you'll need 2 free slots, 1 x CP-PM CS and 1 x CP-PM SS, can't remember whether you'll need to convert the DB from R25 to R4.5 or whether you can go straight, either way it is best to check in the NN43041-464 - 03.06 Document, the full procedure is explained in there.
 
Strong knowledge of networking. Almost all the new equipements need an IP or more.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top