Upgrade Legend to Magix

[Telecomboy]

Customer has A1 Power currently on a Merlin Legend R6.0. They want to upgrade to a Magix R4.0 processor with Merlin Messaging R4.0 (in Legend clamshells). Will 391A3 Power Supplies work for this or do they need 391C1 Power Supplies?

 

[Dexman]

It would say that the needed power supply would depend on the results of the load calculations.

 

[tdaugirdas]

391C1 is recommended for Merlin Messaging - but I suspect the 391A3 will do just fine - depending on the total load of the other modules and installed phones.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[Telecomboy]

Thanks for the replies. Their loads are not higher than the 75 for A3 so they should be ok. Thanks again.