childebran
MIS
I want upgrade two IP office (403 & 406)release 1.4 in release 2.1(24).They are connected with their own Wan ports for data and voice(leased line).This version does it stable and works properly with Wan ports ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Upgrade in 2.1 (24)
- Thread starter childebran
- Start date
- Status
after a lot of strange things with version 2.1(24) and what you can find here, I wouldn't upgrade to this version. better is to take version 2.1(27)
For the IP office 403 you have to upgrade first to release 1.99 and then to release 2.1(27) Give your service pc a static ip address in the same range as the ip office and normally it's just follow the procedure
For the IP office 403 you have to upgrade first to release 1.99 and then to release 2.1(27) Give your service pc a static ip address in the same range as the ip office and normally it's just follow the procedure
- Status
