upgrade from flash 2 to flash 4

[HUCHIMAMA]

I'm going to be upgrading a flash2 to flash4 on mics with 6.0 and was woundering if anyone can give me some tips or things to look out for on this upgrade. After I install the module will vmail boxes still be intact and will the flash see the upgrade after I power it back up ofcourse. thanks again

kg

 

[MarvO1]

I've never had any problems by just powering down, inserting card, then powering back up.
Everything stays intact.

Now, if you go the other direction, from 4, back to 2, look out. You will lose it all.

MarvO said it

 

[curlycord]

Dont forget to install the second mod cord to a second available port! some techs forget....specialy after a good lunch!