Upgrade from BC11SP7 to TSW SP5

[TeleLion]

I need to upgrade a 3 LIM system VERSION=CXP1010017/3/BC11SP7/R3A to TSW SP5, and i only have the PC-Regen so far, is there any way i can know which boards need to have a filed upgrade (PROMs)? is there any way i can feed this is MD inventory tool?

TELEC3

 

[TeleLion]

Upgrade to version shows a max of BC11 in MD Inventory tool???!!!!

TELEC3

 

[whosrdaddy]

MIT is phased out.
Ordering the system via Pocket Solveit will create the correct amount of eeproms.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TeleLion]

how will i know what LSU, DSU version am using on the system? that's remotley.

TELEC3

 

[telephonyacred]

I think you can use the command cnbip:bpos= ... ;

Telephony.

 

[TeleLion]

There is this, but still this will not show me the board type, i need to know if i need to replace the board for a TSW upgrade:

<cnbip:lim=1,brdnam=sesboards;

DEVICE BOARD REVISION INFORMATION
DATE: 02DEC08   TIME: 08:54:07

BPOS       BOARD/BRDID  PRODUCT NUMBER       REVISION STATUS ADD
           /IND

001EXE     LSU         CAA112551D           R9A                             
001EXE     LSU         CAA1125021           R20A                            
001EXE     DSU0        CAA112555L           R6A                             
001EXE     DSU1        CAA112555L           R6A                             

END

TELEC3

 

[pcasi]

You need to upgrade or replace DSU boards to prom revision R8A. LSU look OK.

 

[whosrdaddy]

every LSU/5 revision is ok, you need new proms for LPU5 and DSU/4 though.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TeleLion]

Ok well this is a print out of my lab system which is already at TSW SP5, but how can i know if it's a LSU/3 LSU/4 or LSU/5 from the print out?

TELEC3