upgrade from 3.0 xc ver 5.11 to 6.1 xc

[luv2ski]

i upgraded the thing and now it wont let me program last 4 channels on t1 says wrong cd maybe cartridge it had 2 t1's when i started it carried over 1 thru 48 as em for t1 changed 49-55 to loop ...tried to change only took on 49 50,and 51 wont let me change 52-55 ...truncks are 1-24 then 31-55 right lets me provision and unprovision but not change to em for t1...this is why i dont like it here anymore...wanna drink,ski,ski,ski,ski,skiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
any info would be great

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[senk1s]

did u do an upgrade using the tool or a clean startup?

it probably thinks there is a TM ls/ds in there in exp8 ... thats wierd

one of my buddys was going to do an upgrade ...i'll see if he ran into something like this - i told him put in a few extra hours and do a clean start ...as the line renumbering has to be done anycase

 

[hawks]

On 6.1 the T1 lines go 1-30 (not 24) & 31-60 (not 48). So what you use to program as line 49 now becomes line 61.

 

[hawks]

Sorry miss read the post you should be able to change up to line 54.