Upgrade 3.6 to 4.0 pre check E: full

[teambio]

hi i am upgrading a bcm 3.6 to 4.0 and ran the pre check tool for the upgrade and got a fail of this.
FAIL: BCM drive E: check. Drive E: does NOT have sufficient space
i can find lots of documents on cleaning out the F: and D: drive but nothing about the E:
if anyone can help me out with this it would be great.

thanks
TeamBio

 

[gberger]

Do you have backups in the E: drive? If so, you can delete those.

 

[teambio]

so can i delete the temp folder or are there any things i need in that i have a backup on my laptop
TeamBio

 

[gberger]

Look in the "ftproot" folder and inside there should be a "cdrftp" folder, i bet some of the backups in the "E" drive were going there.
What do you have in the "temp" folder?

 

[gberger]

Look at this, it's should work for 3.6 as well.

http://www.tek-tips.com/viewthread.cfm?qid=1537034&page=5

 

[DBrewsky]

Also remember that 400mb worth of CDR records also reside on the E: drive. These records will need to be deleted or at least enough records deleted to take the CDR space used to under 200mb.

--DB