AdamKerr
IS-IT--Management
- Dec 20, 2005
- 79
I have just been given 3 cisco AS 2511 for my cisco course but they dont have ios 12 on them. how do i go about updating them?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Updating IOS
- Thread starter AdamKerr
- Start date
- Status
- Thread starter
- #3
justvistin
Technical User
Hi,
IOS's are available via the Cisco site, but are not necessarily free.
If you don't have an existing support contract or access to an existing account with IOS access privilages then you may need to pay a fee to upgrade.
It's also a good idea to register at the Cisco site to gain access to additional areas. Registeration is free.
It would also be a good idea to check the memory on the 2511's to ensure it meets the required spec for the IOS you want.
If the IOS is required for a lab (rather than a production) environment then you may wish to check e-bay for Cisco IOS's and/or memory upgrades.
I believe that other sources such as 'IOS Hunter' are available as well, but I'm unclear on the legality of these. Perhaps someone can clarify the situation?
This may seem like a pain to 'simply' set up the lab, but IMHO this is one of the benefits of using physical kit - you have to learn how to perform tasks required in real life . Annoying at times, but also educational.
IOS's are available via the Cisco site, but are not necessarily free.
If you don't have an existing support contract or access to an existing account with IOS access privilages then you may need to pay a fee to upgrade.
It's also a good idea to register at the Cisco site to gain access to additional areas. Registeration is free.
It would also be a good idea to check the memory on the 2511's to ensure it meets the required spec for the IOS you want.
If the IOS is required for a lab (rather than a production) environment then you may wish to check e-bay for Cisco IOS's and/or memory upgrades.
I believe that other sources such as 'IOS Hunter' are available as well, but I'm unclear on the legality of these. Perhaps someone can clarify the situation?
This may seem like a pain to 'simply' set up the lab, but IMHO this is one of the benefits of using physical kit - you have to learn how to perform tasks required in real life . Annoying at times, but also educational.
Looks like your router is end of life..check out this link.
- Status
Similar threads
