Update IP address Option 11C 1

[SanYsidro]

I've misplaced my notes about how to set and change an IP address in Option 11C. Can someone give me a quick overview - or at least what overlay I need to be in?

 

[dj4020]

LD 117

 

[bhassell2000]

These are the notes I have

Change IP Address
PING the OLD IP address
Start
Run
Ping xx.xxx.xxx.xx
LD 117

=> PRT HOST
ID Hostname IP Address
1 SECONDARY_ENET 137.135.128.254
2 LOCAL_PPP_IF 137.135.192.4
3 REMOTE_PPP_IF 100.1.1.1
4 GATEWAY_IP 208.10.104.33
5 NORCROSS 10.215.2.10
6 GATEWAY 10.215.2.1
OK

=> PRT ELNK
ACTIVE ETHERNET: "NORCROSS" "10.215.2.10"
INACTIVE ETHERNET: "SECONDARY_ENET" "137.135.128.254"
OK

=> PRT ROUTE
ID Network Gateway
1 0.0.0.0 10.215.2.1
OK

=> PRT MASK
SUBNET MASK: "255.255.255.192"
OK

* NEW HOST M1SRVR01 10.127.145.14
INET Data Added

=> OUT ROUTE 1
INET Data Removed

=> PRT ROUTE
Route entry(ies) not found.
OK

=> NEW ROUTE 0.0.0.0 10.127.145.1
INET Data Added

=> PRT ROUTE
ID Network Gateway
2 0.0.0.0 10.127.145.1
OK

=> UPDATE DBS
OK

=> PRT ROUTE
ID Network Gateway
1 0.0.0.0 10.127.145.1
OK

=> CHG ELNK ACTIVE M1SRVR01
INET Database updated

=> PRT ELNK
ACTIVE ETHERNET: "M1SRVR01" "10.127.145.14"
INACTIVE ETHERNET: "SECONDARY_ENET" "137.135.128.254"
OK

>LD 137
CIOD000
.STAT ELNK

ELNK ENABLED
Ethernet (qu unit number 0):
Host: NORCROSS
Internet address: 10.215.2.10
Broadcast address: 10.215.2.63
Ethernet address: 00:00:75:45:33:55
Netmask: 0xff000000; Subnetmask: 0xffffffc0
14111202 packets received; 15579276 packets sent
0 input errors; 0 output errors
61 collisions
.
TIM000 15:00 25/10/2002 CPU 0

.DIS ELNK
OK

.STAT ELNK
ELNK DISABLED

.ENL ELNK
Initialize Network Interface.
Network Interface is up.
Host : M1SRVR01
IP Address : 10.127.145.14
Sub-netmask : 255.255.255.192

OK

.STAT ELNK

ELNK ENABLED
Ethernet (qu unit number 0):
Host: M1SRVR01
Internet address: 10.127.145.14
Broadcast address: 10.127.145.63
Ethernet address: 00:00:75:45:33:55
Netmask: 0xff000000; Subnetmask: 0xffffffc0
1 packets received; 8 packets sent
0 input errors; 0 output errors
0 collisions
.****



>LD 117
OAM000

=> PRT HOST
ID Hostname IP Address
1 SECONDARY_ENET 137.135.128.254
2 LOCAL_PPP_IF 137.135.192.4
3 REMOTE_PPP_IF 100.1.1.1
4 GATEWAY_IP 208.10.104.33
5 GATEWAY 10.215.2.1
6 M1SRVR01 10.127.145.14
OK

=> PRT ROUTE
ID Network Gateway
1 0.0.0.0 10.127.145.1
OK

=> OUT HOST 5
INET Data Removed

=> UPDATE DBS
OK

=> PRT HOST
ID Hostname IP Address
1 SECONDARY_ENET 137.135.128.254
2 LOCAL_PPP_IF 137.135.192.4
3 REMOTE_PPP_IF 100.1.1.1
4 GATEWAY_IP 208.10.104.33
5 M1SRVR01 10.127.145.14
OK

=> PRT ROUTE
ID Network Gateway
1 0.0.0.0 10.127.145.1
OK

=> PRT MASK
SUBNET MASK: "255.255.255.192"
OK

=> PRT ELNK
ACTIVE ETHERNET: "M1SRVR01" "10.127.145.14"
INACTIVE ETHERNET: "SECONDARY_ENET" "137.135.128.254"
OK

=>
ELAN014 ELAN 16 host IP=10.127.145.13 is enabled


Thanks,

Buddy

 

[SanYsidro]

Well, I couldn't have wanted for more...

You are generous beyond words - THANK YOU!

 

[Arriero]

Just a note, remember to INI after you change IP Addresses. If not and you STAT ROUT and STAT HOST you will still see your old data around.