hi all ,i hav just installed a IP 500 v2 (63) system and noticed a very unusual ring pattern .when calls comes in it would ring 2 times cut off *as in stop* and then resumes ,with the same pattern . i have checked all the incoming options as well as the line options and they all seems ok to me .im usuing analog lines .
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
unusual ring pattern
- Thread starter 7balled
- Start date
If I were you I would double check the ring pattern of the analog line. I had the same issue with Integrated Access lines and the Adtran was providing a European ring cycle. The IP Office would see the incoming call, provide CID and one ring to the hunt group, and then act like it was a new call.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
- Status
Similar threads
- Locked
- Question
- Locked
- Question