Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

unknown number

Status
Not open for further replies.

lancbomb

Technical User
Jul 21, 2003
296
GB
i have a meridian option 11 switch and a number range 3380 to 3389 and need to identify what these are when i ring them they ring some centrex extns on another site that arnt connected to the switch
 
are they phantom DN's? print the DN's and check to see if they're even built as anything. if they're not built in the Switch, then the call is being handled by the CO. they're probably doing the call forwarding behind the scenes.
 
Print a DNB and then a TNB

Why change the engine if all you need is to change the spark plugs.


 
I have the same problem on my site having unknown number from meridian to cisco side using PRI.. Site 1 is nortel, site 2 is cisco and site 3 also nortel..when site 1 or site call they can see the name display and the calling number, site 2 & 3 they can see also, but site 1 can't see the number and name display (unknown number) if the site 3 make a call to site 1 but if site 1 make a call to sit 3 there is no problem.
 
kiosky: Please start your own thread, it's hard enough to answer 1 question at a time without someone else asking a question that may or may not have the same answer and when someone gives advice will we know which question that advice is for.

Why change the engine if all you need is to change the spark plugs.


 
lancbomb: Print the DNB and TNB for each one to see who they are programmed and post here.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top